home To help the plumber

How to hide the pipes in the tub. How to hide sewer pipes in the bathroom: many ways for apartments and private houses

Pipes that eventually age, wear out and lose a more or less attractive appearance, do not add beauty to the bathroom room and are not a design adornment.

To make the bathroom more presentable, the pipes should be covered with decorative structures. Then we will talk about how to close the pipes in the bathroom, so that this room is not inferior to other rooms of the house or apartment in its aesthetics.

Hidden gasket

Mount pipes in the walls - that's how to hide the pipes in the bathroom, so they were not visible at all. This option is good because after the work done the useful area of the room, which does not differ by the presence of excess square meters, does not decrease in overall dimensions. To lay pipes in the wall, it is necessary in its surface in the direction of wiring to knock out the fences of a certain size. This is not an easy task, as it requires considerable physical effort. This requires the presence of a perforator, a sledge hammer and a chisel. If the wall is concrete or built of modern brick, it is difficult to make a wall in the wall, but it is possible. If the walls of the house were built more than a century ago, in view of the high quality of the brick products, it is even more difficult to break the notch. It is easiest to hide the pipes in the walls, laid out of foam concrete or aerated concrete. Thick blocks easily succumb to the impact force of a perforator or sledgehammer.

First, a contour of the future groove, which should be slightly wider and deeper than the diameter of the pipe, is applied to the wall of the above material with a pencil, nail or other sharp object under a level rail or level.
Then the Bulgarian needs to walk along the drawn lines to simplify the subsequent work.
With the help of a sledgehammer and a sharp chisel or a perforator, stubs of the intended size are knocked out.
Pipes that need to be isolated by special insulation from heat losses in systems with a hot water carrier or condensation in cold water pipelines are installed using plastic or metal arc-shaped fasteners with self-tapping screws.
In order to accommodate the tap and adjusting armature, as well as the water measuring unit, a suitable size rod is made at the installation site.

The wall after the installation of pipelines is lined, and in the place of the water meter and valves, blocking the access of water to the apartment, a locker, a removable tile or roller shutters is chosen.

Tile

One of effective ways Hiding the pipes in the bathroom is an option with the use of tile. It is installed in the same way as when facing the walls, only the installation takes place on a preassembled frame made of a metal profile. For the production of the required metal profiles, tiles, drill with special drills, plastic corners, metal hacksaw or tile cutters and self-tapping screws.

First, a metal frame is assembled from metal profiles, which is a skeleton for tiling.
The size of the frame structure is selected and, if necessary, the tile is cut out.
In the tile under the screws with special drills, drills are made with the help of a drill so that they coincide with the same in the frame.
Screws fix the tiles on the structure of metal profiles, after which the corner areas are sealed with plastic corners.

Note! Tiles in the place of installation of the water meter should be taken out to remove the water flow rate.

Drywall

The most popular method of closing pipes in a bathroom is today the gypsum cardboard system sewing. When using this material, you need to remember that in the bathroom there is always high humidity. And this means that only moisture resistant drywall is suitable for this purpose.

In addition, in the building materials store you need to buy pipe insulation. Before purchasing an insulating material, which can be of different sizes, you need to work on measuring the working dimensions of the pipes. It is necessary to remove the outer diameters of both water pipes and sewer pipes, as well as determine the length of sections of pipelines. The shape of the thermal insulation material is tubular. The inside diameter of such an article must coincide with the outer diameter of the pipe. The thermal insulation product is cut along, after which it is put on the pipe and fixed with a simple construction tape.

For the installation of drywall it is necessary to build a skeleton structure in the same way as for tiles, as you could read above.
In a bathroom with high humidity it is desirable to use metal profiles. The moisture and temperature difference have a negative effect on them to the least extent. In addition, metal profiles are easily mounted. With each other, the frame elements are fixed only with screws, the profile can be attached to the wall using dowels or screws.
Then plasterboard sheets are installed on the structure of the frame. Professionals practice the lubrication of plasterboard on the inside with two layers of drying oil. This procedure increases the repulsion of moisture by the material.
To attach gipsokartonnye sheets to the frame, used self-tapping, which should be separated from each other at a distance of at least 0.25 m. After the full plating of the structure of the frame with plasterboard, the surface of the material is primed for final cladding, for example, wallpapering, painting or installing tiles.

Note! This kind of work on masking pipes in the bathroom is considered the simplest and most effective.

Plastic

Panels made of plastic are easy to install. The choice of color solutions for PVC panels is very wide, so the plastic panels are most interesting to customers with an exquisite design taste. In addition, the plastic does not affect the excess moisture in the room. If this material has approached the consumer according to its characteristics, it is possible to start closing the pipes in the bathroom with plastic panels.

First of all, a metal or wooden structure of the frame is being built.
For the installation of a wooden structure, the markings on the surface of the wall are made in a vertical direction for securing the strips. To ensure that the plastic panel does not bend, the distance between the slats should be up to 0,4 m. Special clamps for fastening work are attached to the wall surface, the vertical step between them should be about 0.5 m. Then the bracket is fixed in the same vertical direction fasteners with self-tapping screws 2.5 cm long.
The structure of the frame from the metal is constructed using the profile of the CD, which is often used to install gypsum boards. Work on the installation goes through the same steps as when installing with a wooden beam, but to the mounting brackets the metal frame is fixed with small clop-screws. When installing the bar or side profile, it is not possible to screw it from the side. In this connection, the following operation is performed: the metal profile is screwed on the side with which it can be done without difficulty, and with the problem - the clamp is bent over the structure and is caught in front.
Since the tree does not perceive the impact of moisture, the wooden frame is treated with special impregnations to prevent the material from becoming moldy, to turn black and eventually rot. In this regard, the metal frame advantageously differs from the wooden one. Although the profile of metal will cost more than wood, it is less prone to moisture. This means that the metal frame is economically more preferable.
Elements of the frame are installed in different directions. Depending on the design, they can be in both the perpendicular and parallel positions with respect to the panels. The latter are attached to the transverse elements at a distance of 0.4 m. Different parts of the transverse profile should be at the same height.
After the installation of the frame, the turn of fixing the panels with the screws comes. The work begins with the installation of a guide element, which gives the places of docking with the walls a more aesthetic appearance. For cutting plastic panels a well sharpened knife is used.
At the final stage, inspection hatches are installed, which allow access to the pipes. The hatch must be of the required size.

Without a qualification of a builder, any engineer, football player or lawyer will be able to close the pipes in the bathroom with their own hands. You just need to have a desire, and also apply perseverance and wit.

The interior of the bathroom or toilet significantly loses due to the bulging water, meters and risers.

Whatever the design decision, the master inevitably encounters the question of how to hide sewer pipes in the bathroom.

There are many options. Identify with one way or another possible, based on the features of the construction of the premises and financial capabilities.

Having hidden disagreeable communications, the design of a bathroom or a toilet will be transformed, we will get a cozy and tidy room.

The layout of communications can be performed with the help of made of different materials.

This combined option wins only due to economy, but not quality.

Drown in the wall pipes of different materials can not be.

The fact is that when they expand, they will "play" differently and leakage may form at the junction.

First of all it is necessary to replace "assorted" with one kind of pipe.

The most reliable are the plastic pipes, which are divided into three categories:

Polyvinyl chloride
Polyethylene
Polypropylene

PVC material is characterized by high strength. It well withstands mechanical loads.

However, it does not respond well to the effects of chemicals and high temperatures. PVC is used for the organization of both external and internal sewerage.

Polyethylene is characterized by strength and resistance to mechanical influences. However, they react poorly to temperature changes, especially at high temperatures. Therefore, for draining hot water their use is not recommended.

Polypropylene is best suited for the construction of internal sewerage. Pipes are strong and resistant. Excellent impact of chemicals, high and low temperatures.

This material can be closed in the wall or floor, without fear of leakage in the near future.

First of all, it is necessary to establish the collector group competently, to use reliable pipes from a durable material - polypropylene, cross-linked polyethylene.

Do the laying with the shortest possible pipe route and minimum connections. The walls in the room should be thick, not half a brick. Thin partitions, panel walls can not be shrouded.

Now, many construction companies at the stage of erecting a house solve the problem of closing sewer pipes. However, in a finished house, you should observe all the requirements for wall sealing of communications:

A scheme is laid for laying pipes with the least number of bends and joints.
The holes made in the wall must be larger than the pipe itself - a diameter 5 cm larger than the pipe diameter.
For each tube, a separate vein is cut - the distance between them is 20-30 cm.
Pipes are closed with insulation. So increases their wear resistance.

If the design of the room allows you to hide pipes in the wall, follow these simple rules. They will help to avoid fast pipe failure. However, always remember that leakage after the expiry of the time is possible.

Plasterboard structures

Optimum and simple way closing of pipes is considered drywall construction. It is quite easy to erect, the material is inexpensive and allows you to peel the surface of the box with tiles or wallpaper.

In the box are hidden not only the pipes, but also the risers in the toilet, counters and any other nodes. For the construction of the box, galvanized profiles and gypsum board sheets are required.

How to hide the sewer pipes in the bathroom under the drywall? The scheme of actions is simple and reduces to the following stages:

Measures are made for the future taking into account special hatches. They are necessary for quick access to connection points, counters.
To the walls are attached guide profiles, to them transverse in case of closing the riser or other vertical pipes.
Between the pipes and the walls of the boxes there must always be a gap of at least 5 cm.
The profile structure is sewed with sheets of plasterboard.
The box is faced with a finishing material.

In addition to the gypsum board box, it is possible to build a false wall. However, this option is suitable for large areas. In a small bathroom, she will take a lot of space.

On the nuances of laying pipes in wooden house presented in the video:

Decorative elements

When there is no possibility to drown uncomfortable pipes in a wall or to close them with plasterboard, decorative special screens will come to the aid. They are designed to cover pipes and other communications. These can be gratings, arches or exquisite constructions with columns.

The products are sold ready-made, more often they are collapsible and can be made to order. Lattices are made of plastic or wood. The color palette of products is wide.

You can purchase screens for painting according to the interior of the bathroom or toilet. Installation of such decor elements is simple and does not require additional attachments.

Installation of decorative special screens for pipes does not take much useful space, which is important for small rooms. This is the most simple and inexpensive option.

When deciding to close the sewer pipes, be sure to consider their condition. Choosing one or another method, be guided by the type of construction design - this house or apartment, the type of walls and the area of the room.

Also do not forget about the design of the bathroom or toilet. Considering all the moments, boldly get to work!

Found an error? Select it and press Ctrl + Enterto let us know.

Starting repair in the bathroom, many are thinking about how to disguise the sewer pipes.

And it's true, because noticeable pipes, valves and meters do not add beauty to the interior of the room. How is it better to hide communications without compromising the functionality of the premises?

We bring to your attention some simple solutions to this creative task.

We have already told in previous publications how to close the pipes in the bathroom. In the toilet you can use the same methods, but with some special features.

Let's consider several options in more detail

Plastic and drywall

To begin with, you need to determine the material for the design that will close your pipes. For bathrooms usually used panels made of plastic or plasterboard.

These materials are suitable for any interior, for any decoration of the floor, walls and ceiling.

The difference in the use of these materials is only the need to decorate drywall. While for the plastic panel you only need to choose the shape and color.

But on the other hand, this drawback of the plasterboard panel is at the same time its advantage, since you can make the panel indistinguishable from the rest of the walls of the room!

Advantages of these materials:

environmental Safety;
economical cost;
simplicity and speed of installation;
collapsible constructions;
possibility to leave access to communications (meters, valves, places of possible leaks).

It is important to remember that drywall in the bathroom is better to use moisture-proof!

So, the material is selected. Now let's get acquainted with different ways installation of plastic and gypsum board structures:

We close the wall entirely;

We establish a false wall;
We use the box;
We mount the locker;
We hide communications behind blinds;
We decorate.

It is important to remember: for any method of closing pipes it is necessary to provide access to communications. Be sure to make the door! Either hidden (zadekorirovannoy in the style of the entire wall), or buy in the store the usual metal.

Close the whole wall

The first way to hide the pipes in the bathroom is to cover the entire wall with the panel, along which they pass. In this case, the panel is installed on a metal profile base.

In those places where there are no pipes behind the panel, it is possible to build cells for storing necessary items (napkins, air fresheners, etc.).

It is important to remember: for any method of installation, it is necessary to leave a space of at least three centimeters between the pipes and the wall!

We establish a false wall

The second method is suitable for rooms where communications are located in a corner. In this case, you can close the panel only part of the wall with pipes.

Use the box

If the bathroom is cramped and you want to leave as much free space as possible, you can close the panels with just the pipes.

If the communications are vertical, the construction will resemble a pilaster. If the pipes pass horizontally, you will get a step.

If the pipes do not go to the end of the wall, you can mount a multi-level structure of gypsum board. The resulting shelf can be used as a stand.

Locker

Instead of a box you can put a nice locker from plywood or chipboard. This is the most expensive method of masking pipes, but it justifies itself with its functionality.

You not only hide the pipes, but also get a place for useful trifles.

Jalousie

Usually, blinds are used to camouflage pipes. Their installation requires more time and effort and is more costly. Many believe that the blinds in the bathroom look ugly.

But plus this solution lies in the availability of pipes along the entire length along the wall. Also accessible are all free places, in which you can place shelves.

We decorate

If you like unusual solutions, understand various materials, constantly fantasize, know how to create beauty with your own hands, decorate the communication pipes yourself!

Use mosaic, painting, decoupage, connect different techniques, find only their own, exclusive techniques!

In conclusion, you can say that the choice of materials and structures for masking pipes in your interior remains only for you.

Each of these methods has its pros and cons, any of the proposed options may suit you. Make a decision based on the size and ideas of the interior of your room.