home Bath and shower

Arrangement of space under the bathroom. Ways of arrangement of a free place under a washstand. Podium for a bath

After repair in the shower room, the question arises, how and what, to cover the space under the bathroom? It is with this problem that most people who decided to change the bathroom face. Podvannoy space looks not very attractive, as usually there are stored cleaning products, tools, as well as water pipes can be seen. Cover the space under the bathroom you can different ways, for example, shut them with curtains or special screens.

These products are characterized by their diversity, they can be made with their own hands or buy ready-made models. Factory screens have the widest distribution, as their assortment is very extensive from simple valves to complex skeletons in the form of a podium. To date, this design is an integral part of the interior, practical and functional. In order to select the best option you need to understand all the proposals.

Ready models

The factory is often equipped with a curtain, which facilitates access in case of unforeseen circumstances to communications, and also allows you to store cleaning products or tools. This method is rightfully considered the most common, besides it will cost without significant costs. These products are usually made of plastic material, however, there are also metal, glass, wooden variations. Dimensions of the construction fit the dimensions of the bathroom.

Finished products can be easily installed and secured with your own hands. They are one or more panels equipped with a curtain. The whole structure is framed by a metal or aluminum frame on special legs. The screen under the bathroom is fixed to the floor at an angle of 90 °, after which the legs are fixed on the floor. This model allows you to completely close the space under the swimming pool. Kinds:

sliding curtains;
closed tightly;
hinged doors;
drawers.

Deaf people

These products are tight closed structures, not equipped with a curtain. They are able to cover the space from the bottom completely. They are distinguished by the type of panels into solid or lattice ones. After mounting the structure, the spacer legs can be loosened, and the screen itself is removed in case of urgent need. Thus, the constant use of the swapped space will be difficult.

Sliding

Products with sliding curtains are very convenient in daily use. Their installation takes relatively little time, so it can be done by yourself. Sliding panels are a very functional type of screen. Several doors from one to four open in the direction and slide one behind the other. Less common are products with opening curtains in the form of an accordion.

The main advantage of this option is the possibility of unobstructed penetration into the swept space. This is very important in small shower rooms, convenient storage of various items for repair or maintenance of the room. In addition, this design does not interfere with quick access to communications. Sliding frames can also be equipped with single or double curtains. This is done for the convenience of locating various containers or household trivia.

Swinging machines

This design allows without any obstacles to have direct access to water pipes, located under the bathroom. Swinging panels differ from their counterparts only in the way to open and close the doors. You can install them yourself without using massive tools. Often, close attention is drawn to products made from wood or MDF. However, this approach is not always practical and functional, but it has an attractive appearance.

Drawers

To date, these products are a very interesting option. Modern technologies have allowed retractable models to become the most popular among their counterparts. However, they are distinguished by a high price, and also by their complex device, so a self-assembling by their own hands will be problematic in the absence of necessary experience. The panels have several drawers in the form of boxes. They can leave the screen when necessary.

Stationary

Another name - the capital screens are non-separable panels. The closed part of the bottom of the bathroom makes it difficult to access the premise. Installation of the product with their own hands will be very difficult, therefore it is better to trust professionals. These models are a design that requires additional finishing. Such screens are usually made of the following materials:

damp-proof plasterboard;
brick;
board;
plywood.

Once the material has been selected, the panels can be finished in any style. If desired, they can be painted with their own hands or instead of using paint tiles, which is very convenient. In addition, as a finishing material, it is possible to use film, PVC panel or artificial stone.

In some cases, the decorated space is decorated with wood, however, in this case it is better to choose water resistant rocks - oak or beech.

Brick options

Models made of bricks are the most reliable base, are distinguished by an affordable price, as well as the ease of erection, which you can do yourself. The one-piece construction is a brick laying with cement mortar, which provides the screen with reliability and durability. Facing is carried out by any material available for this purpose. The enclosed space will look attractive, and the unevenness of the masonry can be corrected by the amount of glue in the finish.

Plasterboard, MDF or plastic

Models of plastic or plasterboard, like other materials are attached to a pre-assembled structure in the form of metal profiles, as well as wooden blocks. For bars of wood, certain conditions must be met, i.e. their treatment and impregnation with protective compounds against the effects of moisture. After installation, the entire frame is covered with the necessary material.

With the help of a curtain, you can securely close the swept space with your hands. This method is rightfully considered the most affordable, simple and cheap. He perfectly conceals the shortcomings under the bathroom, disguises unattractive places, and, in addition, makes it possible to safely store all the necessary cleaning products and equipment.

It is easy to look after the curtain, i.e. it is unpretentious in everyday life. It is enough to pick up an ordinary piece of cloth and periodically wipe it. In addition, the fabric can be useful for applying to the curtain around the perimeter and their fastening. This will seal the material, make it more durable and practical. Usually they leave special folds, but you can do without them.

You can fix the product in various ways, for example, make fastenings with a special tape on Velcro, and it is important that it is two-sided. Thus, one side joins the panel itself, and the other is fixed under the rim of the bathroom with liquid nails. In addition, a small diameter pipe can be used to fasten the structure. It must have the necessary fasteners in the form of loops, for which the coupling will be made.

Worth knowing! Selecting the screen, you should consider the overall design of the apartment, for example, for the country style, a light curtain is suitable, and for a high-tech metal screen will be the best option.

Podium

Of course, curtains - this is good, however, there are other options. Podiums are suitable for a spacious shower, where there is a place to turn around. The decoration, design, size of this design can be very diverse, and their limitation is manifested only by the imagination of the customer. At the base of the frame is laid brick, after which the panel is decorated with a tile or mosaic. The main thing is that all steps should be treated with anti-skid.

Video instruction

Usually the space under the bathroom does not look very aesthetic. An exception can only be the case when the bathroom is complete and overhauled, in which all technical communications are also decorative elements - for example, the pipes complement and emphasize the style of the room. Another option that does not require a "cover" is a unique bathroom model, in which all its appearance, walls and legs create a certain image of this product, and the screen simply "nullifies" the whole idea of plumbing developers.

Most often the space under the bathroom is trying to hide, and if possible also save its useful area. This is especially true if the bathroom area is small. In any case, the use of such a structure will give the room a more accurate and complete image. In addition, using a properly selected type of cover, having beaten it with color, you can turn a functional element into a kind of highlight of your bathroom. Let's see what options you can take note.

Screen for the bathroom - minuses and pluses

Screens under the bath can be made of a variety of materials. Of course, each invoice has its advantages and disadvantages:

plastic - this screen is presented in the modern market in a wide range. It can be either deaf, or with sliding or conventional doors, behind which it is very convenient to hide all sorts of household trivia. You can choose any color of plastic or pattern, imitating a tile, marble. This material tolerates moisture well, does not deform, it is easy to clean and does not require special care. In addition, it is easy to build from it bathroom screen.

glass - the raw material for the manufacture of such screens is a special tempered glass, which is not afraid of damage and does not crumble from accidental impact. You can choose a monolithic version of the screen, tightly covering the space that is not intended for extraneous views. Or you can stop at a more complicated design with doors. For greater rigidity of the frame, three doors are recommended, but they will be swinging, accordion or sliding, depending on your taste and preferences. Such screens can be transparent, matt, with or without a picture.

mirror - in fact, is a kind of glass screen. Mirror Screen visually allows you to expand the space, add to it light and shine. However, you will have to regularly wipe it and clean it of water spray and soap spray to make the mirror look decent.

A couple of decades ago, most of these structures were made from chipboard. The modern market is also rich in them, however this material susceptible to high air humidity and can swell, deform, which is especially deplorable for models with doors. Therefore, if you decide to install such a screen, stop the choice on what is made of a more modern chipboard, designed for wet rooms.

In any case, choosing a deaf option, you need to remember that it will not be very convenient for you to use the space covered by the screen. Also there will be certain difficulties with cleaning. After all, for this you have to completely clean the screen, and then return it to the site.

Homemade brick and drywall constructions

If you are for some reason not suitable for the ready-made screens on the construction market, it makes sense to take the bathroom arrangement in your hands.

Facing - this protection will require more money and effort than the finished purchase screen. However, if your bathtub has a shape that is different from the standard one, then the lining will be an excellent solution to the problem.

The frame can be made most of any material resistant to moisture. The simplest version is from the profile for drywall.

By the way, gypsum cardboard is an excellent material for a self-made skeleton. It is not expensive, and it is easy to work with it - this task is possible even for those who do not have much experience. Most often for its facing use mosaic, tile, wooden or plastic panels, painting, relief plaster. For fans of non-standard designs suitable, for example, leather or dermantin.

If you are a supporter of capital decisions, it makes sense to build a screen of brick. He does not get hit by anything, no changes in humidity and temperatures, nor years of exploitation. However, if there is any breakdown, access to the pipes will be very difficult. Therefore, even with the design, it would be nice to take into account how in this case you will solve the problem.

By equipping the space under the bathroom by yourself, you can show imagination and adapt it to your needs to the maximum, equipped with shelves or compartments for storing household appliances or chemistry. Remember that by creating a dull, non-removable screen, it is desirable to provide it with a hole for air circulation in an isolated space. Another point is that we not only bathe in the tub, but also bathe the children, wash them, etc. It will be convenient, if you design a screen, you will provide in it a recess for the feet - this, of course, is not necessary, but quite functional.

Podium for the bathroom

It is, rather, one of the varieties of a brick screen, although podium can be made from wooden boards. It not only closes unsightly places, but will serve as an interesting option for designing a bathroom. The podium is indispensable if the bath is high: then for convenience and safety it is made stepped. This option is especially good if the area of the room is large. However, authoritative experts do not advise taking more than 1/2 of the floor surface under it.

Curtains

The easiest way to isolate space. They are good for non-standard baths, when you can not buy a ready screen. The curtains are also suitable for closing the tub from the side, and in order to arrange it around the perimeter. Glazed shower curtain do not require special care, but the fabric will have to be washed quite often. Therefore, the material should be selected for wear-resistant and quick-drying. A separate plus of such curtains is a low price. You can replace them at any time with new ones or have several options at once, allowing you to easily change the design of the bathroom. They are attached to the bar, cornice or strung wire.

At the stage of completion of the repair works in the bathroom, often the question arises, than to close the tub from the bottom. After all, the standard inexpensive plumbing, as a rule, looks not very attractive, and the pipes beneath it spoil the whole view in the room. In this situation, it is necessary to seal the "callous eyes" of communications and the front part of the sanitary ware.

Ways to close the space under the plumbing

One of the most budgetary options will be the purchase of a ready-made screen. Such a bath design is easy to install and can be removed easily if you need access to communications.

Reference: Standard screens have legs, with which you can adjust the height of the product, and spacers. Such devices can be made of wood, plastic, glass or metal. Some models with sliding doors allow you to actively use the space under the font. This removes the question of how to use the space under the bathroom. After such a screen you can store shampoos, brushes, razors and other bath accessories.

Before closing the bathtub in the front, you should determine the type of device. Products can be trellised, opaque and translucent. Thanks to a large assortment of such designs, you can choose a screen of almost any color.

Stationary construction

Instead, you can build a fixed stable structure from improvised materials. To create it you will need brick, plasterboard sheets and plywood. As you can see in the photo, the design can be decorated with a mosaic, as well as painted, pasted with a film of PVC or even faced with a stone. At this point, everyone can decide for himself how best to close the bathroom under the bathroom.

How to close the bottom of the bath, if not call the master at home? Often used ready-made structures from a fairly dense foam. Such products are perfectly suited for plumbing, because it is very easy to make space under the bathroom practical from foam. After installation of structures can be carried out independently without special financial expenses.

Tip: Answering the question of how to fill the space under the bathroom for moderate money, you can give preference to the structures from the EAF. First, you can accurately adjust the screen to the dimensions of your plumbing, and secondly, the chipboard can be decorated with a beautiful tile or mosaic.

But such designs have a significant drawback. If you suddenly need to change the siphon or do other work under the bathroom, you have to destroy the entire structure. Therefore, it is worthwhile to think about how to use the space under the bathroom so that there is free access to communications at any time.

Before you finish the bath, determine the convenient location of the window under the plumbing for a comfortable access to the siphon and water. Specially left space can be closed with doors that are sold in the store, or manufactured by yourself, for example, from plastic.

The opening allows you to partially use the space under the plumbing, where you can put detergents, a small wash basin and other things.

Blind

The actual question for many people: how to close the space under the bathroom, if not build a wall of brick or plasterboard? One of the most accessible ways is to install a curtain.

This process is not labor-consuming, therefore installation can be made and independently. First, you need to measure the opening of the bathroom, which must be closed. You can buy a ready-made curtain or sew it yourself.

Tip: If possible, use polyester, since it is better to cover the bathroom from below with waterproof materials, because they do not deteriorate so quickly.

But before you close the side of the tub, select the material that best fits the color of your interior. Then the shutter organically fit into the room, and the bathtub will look beautiful and refreshed.

How to properly close the bath with panels

Another easy way to close the place under the bathroom is to install polymer panels. Of course, you can buy already finished products, but sometimes after repair there are building materials. In this case, you can make a stationary screen with your own hand. How to close the bath panels?

For mounting panels you will need a screwdriver, electric jigsaw, drill and hammer.

Process Flow:

Using a jigsaw, you need to cut out panels of the required size. They can consist of several parts;
To connect the panels together, use hollow plastic profiles, into which the plates are inserted according to the type of the locking system;
Under the bathroom is built a metal frame, on which a plastic structure is fixed with screws.

The video shows in more detail ways how to close the bathroom space with self-made screens.

Aesthetics or functionality?

Often there is a question of how best to close the bath: a decorative shutter or a functional screen?

To begin with it is necessary to understand what goals you pursue, and only then to think, than to close the bath from the side. If you have a large bathroom, where there is plenty of room for bath accessories, you can install a conventional decorative screen removable type.

But sometimes there is a problem: how to sew space under the bathroom so that they can be used regularly? In this situation it is better to give preference to devices with doors and shelves, which can be used for bath accessories. This option will be ideal for rooms with a small area. After all, you will not only unload the shelves, but also beautifully seal the end of the bath.

Tip: Before closing the bottom of the bathroom with a purchase screen, decide on the design that best suits you. First, with a limited budget, it is better to give preference to products made of polymer materials. They are inexpensive, but they serve for a long time. Secondly, to effectively unload the shelves in the bathroom, stop at the choice of designs with drawers and capacious boxes.

Podium for the bathroom

There are a lot of options for closing the tub, and one of them is the construction of the podium. But, as mentioned earlier, the place behind the podium is better left functional, so that the communication was free access. Before you hide the space under the bathroom, decide on the materials used.

As a rule, a brick is used to create a podium, which is tiled during the finishing stage of the work. The process is quite laborious and requires some skills. Therefore, before you close the niche in the bathroom with a self-made podium, adequately assess your opportunities. If you are unsure of what to do with the task yourself, better invite experts.

How to repair the space under the bathroom without involving specialists? A good option would be plumbing plumbing plastic. First, it is inexpensive, and secondly, the process is fairly simple.

We use plastic

How to repair the bottom of the tub with plastic? This method does not require any preparatory work and serious material costs. There is a huge amount of plastic materials that can be used for such purposes. But first of all you need to pay attention to their quality. So what is the best way to close the tub?

As practice shows, it is best to apply either PVC or moisture resistant gypsum board. In case of malfunctions with plumbing, lightweight structures can be easily removed to get to the fittings.

Important! Whatever option you use, remember, methods, tips on how to close a niche under the bathroom a lot, but few people say that the deaf construction is impractical and even dangerous.

If you have chosen a method of brickwork for yourself and have not taken care of the presence of a window for revision, the leakage of water will not make itself felt for a long time. And, most likely, the faulty plumbing will tell you neighbors who live a floor below.

To avoid such incidents, before making the bottom of the bath beautiful and attractive, think about the practicality of the design, and only then choose the most convenient way how to close the bottom of the bath.

Feet or podium?

Why close the space under the bathroom? After all, now sell beautiful baths, covered with colored enamel from the outside. It is necessary only for the color of tiles - and enjoy harmony. The legs of the baths can also become an independent decoration. And modern acrylic and quarry baths do not require any additional work, since under them there is usually no empty space. However, not everyone can afford expensive baths.

Relatively cheap steel and cast iron baths often do not have the most visible appearance from the outside. Feet and drain "callous eyes", spoiling the whole impression of the bathroom interior. It is necessary to decide the question of how to hide all this horror - so that it was both beautiful and comfortable.

Of course, such a bath should not be closed

By the way, the bath is often "stuck in" not in order to hide some flaws, but simply for beauty and creating a pleasant atmosphere. The round bath, built in the high podium, and even with the steps, looks like a font, into which you want to plunge. If the bath is mounted in the podium, in the manufacture of which brick and tiles, she has wide sides, on which you can put a glass of wine or a cup of coffee. The bathroom turns into a place for relaxation.

Another function of the space under the bathroom is the storage space. In small bathrooms, every square centimeter is valuable, and the space under the bathroom is too large to leave it empty.

Thus, the question closing the space under the bathroom is still very relevant. How is it solved nowadays?

How to close the space under the bathroom? Main options

Finished constructions - screens for a bath

The most common and one of the most inexpensive solution is use of a special screen for a bath . These are ready-made structures that are quickly and easily installed, and if necessary, easily dismantled (for example, to replace the drain).

The screens have spacers or adjustable feet. To install such a screen is easy and simple, because thanks to the spacers and adjustable legs it tightly rests against the side of the bathtub, into the wall (if the space under the bathroom closes on several sides) and on the floor.

Prefabricated screens are usually made of plastic. They can be dull colored, translucent or latticed. The flowers are huge, so you can pick up the screen under the already renovated walls and or under the color of the bath itself.

Slightly more expensive will cost bath screen with swinging or sliding doors , but it will add convenience, because the space under the bathroom can be used as a storage place. And if you need access to communications, you do not have to dismantle the entire structure.

The design can be supplied not only the doors, but also the shelves and even the drawers - this is true if there is enough space around the tub to open the boxes. They can store cleaning and hygiene products. Cute and comfortable. Such screens can have all four walls and several compartments. In fact, they are full-fledged "cabinets for a bath." More expensive, but more convenient. Sold ready models, but if desired, you can order a similar design individually for your bath in any company specializing in production - in particular, a variety of cabinets.

Functional design for bath with shelves (Roca)

Functional design for a bath (Duravit factory)

Functional screen under the bathroom

Capital construction for a bath

The second most popular option - creation of a deaf (capital) structure . Most often used for this purpose brick, moisture resistant plasterboard, plywood or chipboard . The structure is faced with tiles or mosaics, although other options are possible - painting, PVC filming, leather hanging, PVC paneling or even wooden dies (treated with a special composition for protection against moisture).

In addition, some manufacturers of bathtubs produce structures of plastic or dense foam, which are frameworks requiring finishing (e.g., cladding). These prefabricated frames are ideally suited for a bath (especially if designed specifically for a particular model of the same company - it is worth choosing this option if the bath is a non-standard form). However, our people, appreciating reliability and thoroughness, tend to prefer more durable materials (the same brick).

Have capital construction for a bath there are drawbacks. If suddenly there will be a "catastrophe", it is necessary, probably, to break the whole structure. Brick , of course, very reliable, but also problems brick construction can deliver much more. A screen made of chipboard or drywall will be easier to disassemble. However, this is also a problem.

Therefore, by creating capital structure under the bathroom , never mind - from brick or plasterboard , be sure to leave a window of sufficient size. It can be closed with ready-made metal-plastic or metal doors sold in the shops of finishing materials. If you do not like this option, make the door yourself (or order from a professional), cover it with the same tile or mosaic with which the screen is lined. The door will merge with the whole structure and will not stand out.

The presence of an opening and a door is an opportunity to at least partially use the space under the bathroom. A deaf construction will not allow not only to do any work to replace or repair communications, but also to use valuable square meters.

By the way, one more tip. The bath is usually used not only for reclining in it, but also for other purposes (washing, shoe washing, buckets, etc.). And the bath itself must also be cleaned. A deaf screen in such a situation can be uncomfortable, since the feet will rest against it. For convenience, leave a small niche for the feet - more often slanted. Although, of course, this is not necessary.

An inclined niche under the feet in the capital construction under the bathroom

Experts still recommend leaving a small opening (at least where it is not visible) for ventilation, since under the bathroom, if it is tightly closed, there will be unhealthy dampness, and this is bacteria, mold and other bad things.

To make a design for a bath of plasterboard, particleboard, MDF, etc. , you must first mount the frame from the metal guides and racks. However, the frame can be wooden, although for a bathroom this is not the best solution.

When assembling the frame, take into account the thickness of the sheet, tile glue and tiles - usually already pasted tiles are flush with the side of the bath or slightly "drowned" under the bath, but does not protrude, as in this case additional waterproofing and finishing of the structure will be necessary. Brickwork must also be carried out taking into account the thickness of the tile: it is necessary to determine immediately whether the bath is as if sunk in the structure or, conversely, the sides of the bath will slightly protrude above it.

Blind under the bathroom - also an option

The most economical solution to close the space under the bathroom is the blind. Someone will say that this is not modern, but the styles and retro have not been canceled. If the apartment is decorated in exactly one of these styles, then the curtain surrounding the bathtub will look quite harmonious. To close the space under the bathroom curtain mounted frame, which is suspended curtain - more often of non-woven material (sometimes buy a shower curtain and cut it to the desired length).

Blind under the bathroom. The room is in retro style. Kohler

This option is good, for example, for those cases when the bathtub has a non-standard shape, and there was not a ready hard screen for it, and you do not want to build a capital structure for one reason or another. In general, it looks good, but it is still worth buying or ordering two curtains to change them, as they will have to be washed often.

Podium under the bath

A less common option is to create a catwalk under the bath. For its installation, as a rule, use brick as one of the most reliable, durable and moisture resistant materials . A brick podium can easily withstand the weight of a heavy filled bath. The brick screen is usually tiled or mosaic.

In addition to the brick for creating a catwalk in the bathroom, use tree , but much less often. The boards can be tiled, but often they are simply subjected to special finishing (with a moisture-resistant effect), opened with varnish. This option is suitable if the podium is not very high, and the bathroom is designed in a classic or rustic style.

The podium is created not only for beauty, but also for organizing communications when transferring a bath from one place to another - The sewage drain should be tilted, so the bath should be raised. The podium allows to accomplish all this, hiding from the eyes all that can ruin the view of the bathroom.

The decorative panel under the bathroom gives the bathroom a finished look. For its design, you can choose a plastic or acrylic construction. However, they will cost a lot, especially if the bowl has a non-standard form. It will be cheaper to personally make this screen under a bath of tiles pasted on a specially prepared frame for it.

The walls and the floor in the bathroom are tiled with tiles, and the plumbing is installed in its places and connected to communications. Everything looks great. The only problem is the space below the bathroom from the bottom of the bathroom.

To the interior of the room began to look harmonious and complete, it is necessary to somehow close the bath itself and the pipes connected to it.

The main task of the decorative screen under the bathroom is to close the eyes of the owners of the unpresentable legs and the outer side of the bathtub

If the plumbing for bathing is made of acrylic or plastic, in most cases outside it has a pretty decent look. A cast iron or steel products look on the contrary are not encouraging. They must be decorated outside, otherwise the bathroom will not look neat.

Often housewives under the bathroom store detergents and other necessary in the home well. All this, like communications, it is desirable to close the decorative screen. Such a screen is a great way to hide superfluous and not too beautiful in appearance. All these jars, crockery, rags and pipelines will be safely hidden behind it from the sight of people.

If the bathroom is faced with tiles, then the screen under the bathroom is recommended to do also from it. So the design of this room can be arranged in a single completed style. The main thing when installing this decor is not to forget about the need to have access to communications. The screen will need to make a hatch, through which, in case of leaks, it will be possible to get to the pipes for their repair.

What are the possible decorations

Baths differ in form, material of manufacture and functional. But the ways of decorating the space under them with tiles are the same in all cases. It is necessary to make a reliable foundation for tile, and afterwards stick it according to all rules and wipe the seams.

When constructing a decorative partition, it is necessary to remember the need for a niche for the feet, and also not to forget about the hatch that facilitates access to the sewer pipes

Constructively, the screens under the bathroom can be:

with sliding or swinging doors;
removable or capital;
with drawers and without them;
deaf and with a niche downstairs.

The easiest way to lay the tiles is under the side of the tub. When you use it, you do not have to spend your energy on carefully aligning the new edge. It will be enough to lay the top row of tiles under the side of the bath or level with it vertically. Plus the frame and the rough surface for the ceramics sticker in this case will also be made easier.

If it is decided to use a ceramic tile for the lining of a niche under a bathroom, then the simplest way is to make a blank solid screen from it without any frills. However, with blockages and leaks, it will not allow you to reach the communications. It will be necessary to break it, and then decorate everything again. It is difficult to call such a decision thoughtful.

A dull tiled screen is simply mounted and looks elegant, but if the siphon of the bath clogs or under it the pipes break, then this decor will have to be broken without the possibility of restoring

A more practical option is with a revision door or window. When this screen is installed, a technological hole is provided, which is closed with a plastic hatch or with a panel that is one tile in size. It turns out and presentable and practical.

Screens with sliding or swinging flaps made of tiles are extremely difficult to make. The tile should be glued to a solid and without a warp base. And in the case of opening and closing doors, this can not be achieved. Tiles will inevitably fall off such a surface.

Bath is often used for bathing babies and washing clothes. Stand at this next to her have to come close. If the floor is not made a niche or the screen does not have a downward slant inward from the edge of the bowl, then there is nowhere to put your feet in this situation. Standing next will have to bend deeper, unnecessarily straining your back. When decorating a bath, it is necessary to provide a recess for the feet.

The choice of ceramics for the panel under the bath

Ceramic tiles with glaze are resistant to moisture and durable. It is easy to clean and install. Its only drawback is the fragility of the glazed layer, when it strikes it easily splits. But if you do not throw heavy objects into the tile, then this problem is not so relevant and significant.

Marking on the box allows you to quickly navigate in the range of ceramic tiles, for the screen in the bathroom it will be enough to be cheap wall and not frost-proof

The dimensions of most of the baths are modest. Tile for decorating the space under them is recommended to choose a small or medium size. Large slabs will have to be cut, and these are excess residues and potential losses from cracking the glaze with inaccurate cutting.

Also, you can use a mosaic to decorate the screen. However, spreading the pattern out of small elements is long and time-consuming. Easier to choose ready-made mosaic modules in the form of sheets from a glass mesh with the ceramics already pasted on it. They will need to be simply cut and fixed on a partition made of plasterboard or brick.

Formation of the base under the tile

The tile under the bathroom can be glued to a wall made of plasterboard, brick or mortar plates. All three options are acceptable. But the brickwork will weigh a lot, so it should be used only as a last resort. Excess load on the bathroom floor from the brick partition length of one and a half and a height of about half a meter is best avoided.

Method # 1: Gypsum boards on the frame

The base for the tile can be quickly and easily made using plasterboard. To do this, it is necessary to build a framework of bars or a metal profile of the desired configuration, and then girdle it with plasterboard slabs. In this case, if wood is selected for the frame assembly, then it must be impregnated with antiseptics.

The main thing - plasterboard for installation in the bathroom should be taken exclusively moisture resistant grades (GKLV) with a surface of green tint. This material does not rot and does not form mold. It is durable, durable and does not swell from the water that has fallen on it. Use conventional GCR or wood-pressed boards without lamination in a bathroom with its constant humidity is strictly not recommended.

The frame for gypsum cardboard can be made from wooden bars 40x40 mm, but in the bathroom it is still better to perform from a more moisture resistant metal profile

The base under the tiles is made in the following way:

A marking is made along the perimeter of the bath on the walls and the floor level with its edge.
Mounted a reliable frame from all sides, intended for decoration.
The frame structure is leveled and fixed with dowels to the floor and walls.
The plasterboard sheets are cut taking into account the left of the gaps in the centimeter near the floor and the side of the bath, which afterwards will be filled with sealant.
The gypsum board is fastened to the carcass with self-tapping screws in steps of 10-15 cm.
At the place of revision, a hole is cut for the hatch made of plastic.
Stitches in the places of abutment of GKL to the walls are glued with a sickle.
The joints along the entire perimeter of the gypsum board structure are greased with a sealant, and the surface of the sheets is covered with an acrylic primer.

It is not necessary when fixing the GCR to tighten the screws, this can lead to the destruction of the sheet at the point of their screwing. And fasteners must choose short, so as not to damage the sides of the bath. The inspection hatch will be installed after the tile has been affixed to the final design of the screen under the bathroom. To fix it enough ordinary liquid nails.

To ensure that the screen under the bathroom turned out to be beautiful and smooth, special attention should be paid to the layout, the corner stand must be strictly at the bowl angle (+)

When mounting the frame, you can use a mounting foam. It will be glued to the outer side of the bath, the plasterboard and the profile or bars, thereby combining them into a single structure. You just have to watch that it does not squeeze out some elements of the septum formed under the bath, otherwise the screen will turn out to be crooked.

And here is a version of the frame with the subsequent facing without attachment to the dowels. Instead, a sanitary sealant was used to fix the profile. The following materials will be required for the job:

Image Gallery

Sanitary sealant with a "gun"

Prepare all materials and tools in advance, you can start work. First we make the markup, then we set the framework for the frame, the frame itself and lay the tile.

Image Gallery

Do not forget about the opening for the technical hatch - it will come in handy when you need to remove the blockage or change the details of the drain.

Method # 2: Brick laying

A beautiful and durable tiled panel can be made in the form of a small brick masonry. To do this, in addition to bricks, a mortar will be needed to calculate 1 part of M-200 cement for 6 parts of sand and skills as a bricklayer.

Such a partition is intended solely for gluing the tile, it is not permissible to use it as a bearing stand for a bath. For this, there are special legs and mounting frames. Moreover, between the upper bricks and the bowl of the bath should remain a gap of 2-3 cm to fill with mounting foam.

Clutch should be made as narrow as possible from the brick put on the edge, its strength for tiling is quite enough and the load on the floor while minimizing

Laying the first row, it will be necessary to take out two or three bricks in the middle of the bath to form a niche for legs in this place. And also do not forget about the opening for installing the inspection hatch. After the masonry has been completed and the solution has solidified, the resulting septum still needs to be leveled with plaster, so that it is possible to glue the tiles on it.

Ceramics can be turned on only in two or three days. This time should be enough for the solution to finally grasp and dry, and the septum has passed the stage of shrinkage deformation. If the tile starts to glue immediately, then in a couple of days it can simply fall off because of the inconspicuous displacement of the masonry.

Photoinstruction on screen mounting for acrylic corner bath. As a facing material, a mosaic is chosen - it is best placed on curved surfaces.

Image Gallery

Brick creates a foundation that does not deform with time and almost does not require repair.

Method # 3: Partition from the slabs

Instead of bricks, the foundation under the tile can also be made of pile-and-mortar plates. It can be plaster-damp or silicate products. Both options can be used in the bathrooms. They are produced according to the standard with a minimum width of 80 mm, which makes it easy to create a strong supporting structure for the tiles under the rim of almost any bathtub.

Pazogrebnevye plates are easily cut with an ordinary wood hacksaw, from them under the bath is an excellent partition for subsequent tiling

The plates are joined together by special glue or plaster. The presence of grooves and ridges along the edge of the product greatly simplifies the clutch. And for the binding of the partition to the wall of the bathroom, metal staples and dowels are used. As a result, a smooth surface should be obtained, completely ready for gluing ceramic tiles.

Nuances gluing tiles

Finish lining formed under the bathroom partition is made with a tile adhesive or liquid nails. The first option on the back side of the tile is applied with a notched trowel, and the second - from the tube several points along the perimeter and in its center.

The first tile of the tile is glued in one of the upper corners and leveled with the help of a level, the others will be attached already to it

To prevent tiles from sinking to the sides, plastic crosses are inserted between them, allowing precise control over the dimensions of the interlacing seams. The latter after completion of the cladding are subject to mandatory trowelling. Otherwise, through them, water will fall under the pottery, which sooner or later will lead to its falling away.

The construction of a removable screen

In addition to rigidly fixed on-site designs, the decoration of the space below the bathroom can be done with a removable panel, which requires:

Tile.
Furniture height-adjustable legs.
Reiki 20x40 mm to create a framework for support.

First, a piece with such dimensions is cut off from the OSB sheet to completely cover the side of the bath. Only in height it is done a little less, centimeters by five. In this lumen from the bottom should be free to enter the soles of the feet. After cutting, the frame is stuffed onto the OSB, and the legs are already attached to it.

The base of the removable screen for a tiled bath is made of oriented chipboards, which due to their internal structure are durable and resistant to moisture

Tile on a wood plate is glued on standard technology with the use of sealants and trowelling compounds. After grouting the resulting screen can be attached to the bath and adjust the legs, so that it stands in its place exactly. By twisting the supports, its upper edge must be pressed to the side of the bathing from below, then this decorative panel will stand motionless.

Facing of baths of complex shape

If the bathhouse has curved contours, then the usual screen with tiles on it can not be established. The basis of gypsum board can be made of any shape. But then stick to it large in size ceramic tiles Not sure it's going to happen. Ceramics do not bend, it can only be broken.

However, a screen of complex configuration with arc-shaped outlines is quite possible to be lined with the help of a mosaic. Its small pieces fit perfectly for this purpose. She is not afraid of moisture and will serve in the bathroom for more than a year.

Mosaic can cover a bath with any contours, it allows you to easily repeat all of its bends and bumps

For the lining of a bath or jacuzzi, it is suitable as a mosaic in the form of separate pieces, and ready-made modules on a flexible grid. The first method is laborious and long. It is much easier to use the modules with the mosaic elements already pasted under the given pattern. With their help, it will be easy to repeat the contour of the bowl.

Video: All about decorating a bath

How to make a curtain for an acrylic bath:

Installation of a decorative screen with a tile for a bath:

The nuances of creating a framework for veneering on the basis of hypocarcone:

If the appearance of the bath is not pleasing to the eye, then it can always be covered with a decorative screen. In a situation where the entire bathroom is tiled with tiles it is also recommended to use it for decorating the bowl of the bath. The basis for tiles is the easiest way to make a gypsum board, but there are also possible variants made of bricks or stucco slabs. The device of this decor is not something complicated, you can do it yourself.