Homemade drilling rig for water

Every person who has their own summer cottage knows how important it is to have their own source of water. This is not a privilege, but a necessity, without which you cannot take a shower, wash fruits or water flowers. Of course, someone will remember the mythical centralized water supply channels in rural areas. But this is nothing more than a fantasy.

At the moment, the only way to get a full-fledged source of water in the country is to make a drilling rig with your own hands and use it to drill a well. Believe me, this is not as difficult as it might seem at first glance. But you have to make some effort to get the result.

Types of drilling rigs for water

Before building a water drilling rig with your own hands, you need to understand a little about the features of the most popular designs. There are four main types that are most often used by builders:

1. Auger drilling rig for water. In the process, the auger takes out the soil. No rinsing water required.
2. Shock rope construction. The system consists of a frame and a triangle base. The main work is performed by a chisel or a bailer, which are attached to a cable.
3. Manual installation with a rotor is the simplest, from an engineering point of view, option. It doesn't even have an electric motor. Human power is used for drilling. Such installations for water extraction are rarely used in professional drilling due to their slowness and high labor costs.
4. Rotary water extraction system - provides efficient hydrodrilling.

As you can see, each water drilling rig works according to a certain principle based on a unique design. For example, if you carry out percussion-rope drilling with your own hands, then the destruction of the soil layer will occur with the help of a load. It will rhythmically descend, destroying layer after layer.

Attention ! As soon as the soil softens, it is removed from the funnel. Then the cycle repeats again to get to the water.

If you use a rotating drill when working, then you can both win and lose. The payoff is that you need to put in less physical effort. The main difficulty lies in the design of the structure itself. It is rather cumbersome and technologically complex. Therefore, you need to make a lot of effort to make it.

Attention ! It is impossible to create certain structural elements for a drilling rig with your own hands. Therefore, be prepared for the fact that you have to buy them.

Some parts for a self-assembled drilling rig will have to be ordered from a turner. The main thing is that the result of your work is a professional apparatus that will perfectly cope with the task at hand. In addition, after use, you can resell it or rent it out.

Quite often, after successfully drilling a well in their area, neighbors begin to contact the person who carried out this project with a request to do the same for them. Therefore, building a water rig with your own hands can be the first step towards starting a successful business.

Drill types

Not only drilling rigs can be divided into types. The drills that you will use to create a well with your own hands also have their own classification:

• Spoon drill for water drilling rig. This structural element is used on plastic soils. Usually it is a mixture of sand and clay. There are two versions. In the first, the bottom of the spoon is made in the form of a bucket with a cutter on the left side. The right side is made in the form of a transverse protrusion. In the second version, the spoon is made from a pipe of a suitable diameter.
• A serpentine drill is needed for the passage of dense loam. The device works like a corkscrew. It is quickly screwed into the ground. The blade of the structure is made in the form of a dovetail. In this case, it must be pre-hardened. For the manufacture of a structure, the services of a professional turner are needed; it will not work here with your own hands.
• The chisel is needed to break through high density rock. When creating a structure, special attention should be paid to the taper angle. It depends on this characteristic what kind of soil you can work with later. For hard rocks, you need 110-125 degrees, for soft, 35-70 is enough. Form is also of great importance.

Choosing the right drill also plays an important role when building a DIY water rig. If you pick up the wrong drill, you simply won't be able to go deeper to the desired mark.

Step-by-step instructions for creating a manual drilling rig with your own hands

Required tools and materials

Before you start assembling a manual drilling rig for water production with your own hands, you need to check the availability of materials and tools, you should have:

• Plumbing cross.
• Hacksaw for metal.
• Steel pipe. Its diameter should be half an inch.
• Dies.
• Adjustable wrench 1.
• Squeegee with half-inch diameter.

As soon as all the tools and materials are collected, you can start building the structure with your own hands. But first you need to prepare pipe sections. They will serve as the basis for a homemade water drilling rig.

Algorithm of creation

To create a water drilling rig with your own hands, you need to use quality materials and tools. At the same time, the algorithm itself is not particularly difficult. It consists of the following stages:

1. To create a cross structure from pipes, you need to make a thread at the ends. Moreover, its length should be two centimeters.
2. Weld the steel plates to the end-face of the pipe. Each plate must be made in the form of a tip.
3. Provide a water supply. You can do it yourself. Just connect the hose to the cross hole. For tightness of the connection, you need to use a special adapter. This will increase the efficiency of the rig.
4. A plumbing thread is mounted in the hole of the cross. It is best if it is made of PVC. As a last resort, you can use hemp fiber.
5. A piece with a tip is connected to the bottom of the pipe. To make this possible, you need to use a squeegee.

After completing all these points, you will receive a finished and installed manual water drilling rig that you made by hand. But there is one important nuance that you should be aware of. When the well reaches a one-meter depression, it is replaced with a longer pipe section.

Do-it-yourself electric water drilling rig

You need to start traditionally with the selection of the necessary tools to create a do-it-yourself water rig, you will need:

• drill with a set of drills,
• screwdriver,
• Bulgarian,
• welding device.

The drilling rig itself for water consists of the following structural elements:

• bailers,
• glasses,
• bed.

To work on water extraction with your own hands move faster, the drilling rig needs to be connected to the motor. The optimal cartridge weight is 70-80 kilograms. The thief is responsible for cleaning the face. The manufacturing process consists of the following stages:

1. The glass must be made from a pipe. In this case, the diameter of the part should be in the range from 11 to 12 cm. The heavier the material of the drilling rig for water that you make with your own hands, the better.
2. At the bottom of the segment, a sharpening is made in the form of triangular teeth. Several holes are drilled in the chuck.
3. A hole is dug in the ground. A glass of a drilling rig for water, which you are building with your own hands, will drop into it.
4. The drill is made from a steel pipe. In cross-section, it should be 10 cm. A thread is screwed onto the upper end. On the opposite side, a screw screw is made for 1-2 turns. Its diameter is 20 cm.
5. Steel knives are welded to the auger.
6. A tee is attached to the bar.

The drill of the finished drilling rig for the water needs to go deeper. As soon as the depth exceeds 1 meter, the bar is lengthened. As you can see, all this can be easily done with your own hands, and you will have water on the site.

Outcomes

Making a water rig with your own hands will allow you to get complete autonomy and your own source. The design is not particularly difficult, and everyone can assemble it.