How to determine the aquifer when drilling a well - working methods

Owners of suburban areas are interested in the answer to the question of how to determine the aquifer when drilling a well. In the process of work, you can stumble upon several deposits of water before you get to what you need.

The top layer is called perch. It is located at a depth of up to 6 meters and is formed as a result of rain and snow melt. This water is undrinkable and is used for irrigation.

The second and third layers carry a clear and usable liquid. The second layer is located at a depth of up to 18 meters, and the third is up to 40 meters (details). Aquifers are surrounded on both sides by clay or lime, the thickness of which reaches several meters.

Consider ways to determine water

Among the effective ways to determine the water on the site are the use of silica gel, a barometer and a reconnaissance method or observation of plants.

More about them:

We look at the sand

How to find out the aquifer when drilling a well will tell you the quality of the sand. Fine sand indicates the surface layer. The deeper, the sand is coarser and resembles gravel.

The first water that appears in the well is not considered drinking water. Therefore, drilling should be continued until the appearance of the second layer. The top and bottom of the aquifer is determined by drilling speed. The drill enters the water layer gently. In addition, groundwater can be under pressure and when it is opened, it flows like a fountain upwards.

Drilling aquifers requires a certain amount of responsibility. Only a specialist can accurately determine the required water carrier. Therefore, we recommend that you do not be shy and order their services. This will save you time and nerves.