Mold remover for the bathroom
The question of how to get rid of mold in the bathroom worries many people who are faced with the appearance of a fungus. Black mold is a common occurrence that occurs in rooms where there is constant humidity.
Causes of mold
Spores of the fungus that forms mold are present in any room, but they can only grow in a warm environment, having an adverse effect on human health. The main sign of the appearance of the fungus is a sharp smell of dampness.
- Humidity is the main cause of blackscale damage to surfaces in the bathroom. Condensation often appears on many surfaces in this room, which increases the humidity of the air, creating excellent conditions for the reproduction of spores;
- lack of ventilation or its inoperability. Since the bathroom is constantly using water, the air in the room is always humid. If there is no hood in it, it is practically impossible to monitor the humidity;
- heat - for the active development of mold, a minimum positive temperature is sufficient. And +20 (average room temperature) degrees are considered the most optimal for the development of spores;
- lack of natural light. A fungus is a common microorganism that the rays of the sun have a detrimental effect on. That is why black mold appears in dark corners where there are no sun rays.
Black mold growing in a humid environment is dangerous to human health, as it can cause many diseases:
- respiratory diseases - pneumonia, bronchitis, laryngitis, tracheitis - the cause of illnesses are fungal spores;
- asthma - the disease manifests itself in people with allergies, so it is contraindicated for them to be in a room on the walls of which black mold grows;
- migraine - unfavorable environmental conditions cause severe headache attacks;
- diseases of the elderly - black mold spores have a negative effect on the body of the elderly, suppressing their immunity, and also causing the development of various diseases.
Black mold in the bathroom is a health hazard Folk remedies for mold control
There are many ways to remove mold from surfaces in the bathroom, including folk and industrial remedies. However, chemical preparations should not be used by those people who suffer from allergies and diseases of the respiratory system. In this case, you can remove mold from the walls in the bathroom with folk remedies, such as vinegar, ammonia, borax, iodine.
Alcohol allows you to remove the fungus on glass and tiles. To prepare a tool for cleaning surfaces from a fungus, mix alcohol and water in equal parts. The resulting mixture is applied to the surface with a bath cloth or spray gun, and after 3 hours it is washed off with water.
Do not mix ammonia with powders - this causes the appearance of gas, which is dangerous to health.
Ammonia for mold control This is an effective way to remove fungus from walls, as vinegar kills 80% of spores. To qualitatively remove black spots from the walls, you can use white or table vinegar. Before removing the mold in the bathroom, you need to apply vinegar to the affected surface, then leave the composition for 2 hours. Then you can rinse the vinegar with water and dry the finishing material. To prevent the recurrence of spores, you can spray vinegar on the surface of the bathroom once a month, remembering to rinse the product with water after cleaning.
Any type of vinegar will work against mold. The use of borax is considered the safest option for removing fungus from the walls, because borax is not dangerous to the body. To make the composition yourself, it is worth mixing 150 g of the substance with a liter of water. You can apply the resulting solution with soft brushes that will quickly remove all mold from the floor, ceiling and walls. It is not necessary to wash off the composition with water pressure, since the applied product will not allow spores to develop for 2-3 weeks. After completion of the procedure, the surfaces must be completely dried.
Hydrogen peroxide
To fight mold growing in the bathroom, you can use hydrogen peroxide, which is an excellent tool for killing fungus. However, she needs to learn how to use it correctly so that the result of cleaning is noticeable after the first use. Three percent peroxide can be gently applied to the surface with a rag, and after 10 minutes rinsed with water so that the agent is completely washed off the finishing material.
Baking soda
This is an inexpensive, modern, and most importantly, an effective cleaning agent that can quickly remove spores from the premises. Also, soda helps to fight the unpleasant damp smell that appears in the bathroom after a fungus attack.
Dilute 2 pinches of soda with a liter of water and mix thoroughly so that the soda dissolves and does not remain crumbly on the bottom. Then this product is applied from the sprayer, and after half an hour it is washed off the walls with a hard brush or rag.
Tea tree oil
This is an expensive anti-microbial agent, which is required in a minimal amount to clean surfaces. It is enough to dilute 1 tablespoon of oil with 200 ml of water, and then immediately apply to the surface. As soon as the black mold is corroded, the oil can be washed off - while you should not be afraid of an unpleasant smell, it will disappear after 2-3 days, but the result of cleaning will be noticeable immediately.
Tea tree oil
grapefruit seeds
The seeds of this fruit, or rather, their components, destroy the fungus colony in the bathroom, while perfectly disinfecting surfaces. To make the composition yourself, you need to mix 10 drops of the extract with one glass of water. The agent must be sprayed on the surface of the walls, paying special attention to severely affected areas. It is worth keeping it on the walls as long as possible, since the result of the work depends on the time - on average, the product is washed off after 2 hours.
It is necessary to dilute 100 g of powder in 1 liter of water and treat the surfaces with a sprayer. After treating the surface of the walls and removing mold, which is dangerous to health, you need to thoroughly rinse them with water.
Since copper sulfate is a very toxic agent, it is necessary to use protective equipment for the skin of the hands, eyes and respiratory tract when treating surfaces.
Anthracene oil
This oil is made from coal tar and has a sharp and unpleasant odor, so after cleaning the surfaces in the bathroom, it must be thoroughly ventilated. However, the oil is capable of completely destroying the fungus in one application, and cleaning the walls and floor. It must be diluted in water in equal proportions. On the walls, such a composition should be kept for 3 hours.
Iodine
You need to dilute 10 mg of iodine with a glass of water and leave it on a shelf in the bathroom. Iodine vapor will disinfect the room and help clean it from fungus spores.
Industrial anti-mold
In order for the fight against the fungus to be effective and the question of how to wash the mold in the bathroom was not an edge, you can use modern industrial solutions and products that allow you to clean the plaque soon after the spores multiply and the affected surface grows.
Most often, cleaning products are represented by sprays and solutions, which include sodium hypochlorite. It not only allows you to remove black mold, but also destroys its spores.
- so that drops of the cleaning agent do not fall on the finishing material and the floor, you need to cover all areas with a special dense cloth;
- you need to spray with a spray the places where there are moldy mushrooms and wait until the drug completely penetrates deep into the black mold;
- then the composition can be removed from the surfaces with a rag, abundantly moistened with warm water;
- after that, it is important to completely ventilate the room, and at the same time dry the finishing material.
It may be that one treatment in order to remove the mold will not be enough and then the spray will have to be applied again. However, do not clean too often, as it can harm the finishing material.
Industrial anti-mold Veksa
An excellent modern tool that, in addition to destroying the fungus, also has a powerful whitening effect. If you do not know how to remove mold, try using this tool, which quickly destroys the spores of the fungus, prevents its rapid appearance. The packaging of this composition is designed specifically for cleaning surfaces in bathrooms, as its “design” is specifically designed to take into account the specifics of wet rooms.
The main substance of Veksa is active chlorine, which can destroy fungus spores not only on ceramic, but also on stone, wood, and plastic surfaces. Of course, in each case, you should take into account the concentration of the composition, which is written on the package.
Veksa is a Russian remedy, which should be used strictly according to the instructions. The frequency of cleaning surfaces with the composition is 2 times a month, depending on the rate of mold growth. Often Veksa is used for prophylaxis, as the product is equipped with a powerful whitening property. However, even on dark surfaces, the effect of using the composition will be noticeable after the first application.
White and Vanish
These cleansers can fight not only dirt, but also fungus spores. Despite the fact that Whiteness and Vanish are expensive, they are able to defeat not only mold, but also get rid of the problem itself, namely, to completely destroy spores that are difficult to remove from finishing materials.
These products do not contain chlorine, since sodium percarbonate is considered the main active ingredient. In another way, this component is called oxygen bleach, because it is made from hydrogen peroxide, which quickly and easily destroys fungal spores, while gently cleaning the surface.
You need to use Vanish and Whiteness according to the instructions that are written on the package. It is worth using these products to clean surfaces from spores once a month as a preventive measure so that the fungus does not attack the room again. It is recommended to apply the composition to the surface with a thick cloth so that it is evenly distributed over the joints and the base of the finishing materials.
Sanitation and prevention of fungus
The fight against mold growing on the ceiling is carried out using air jets, in which trace elements and ions are present. Such air is directed to the places where the fungus is affected and begins its work immediately after applying the agent with a special device. This method of struggle should be performed only by specialists who have previously received the necessary training.
In order not to worry about getting rid of mold, which is dangerous to health, you can follow the following preventive measures:
- ensure constant ventilation of the room with open doors or an exhaust fan;
- you can reduce the increased humidity of the air with the help of an electric heated towel rail, which will dry the room;
- all pipe connections and faucets that may be leaking should be repaired. It is also important to regularly monitor their serviceability. High-quality waterproofing will avoid the appearance of condensate on surfaces;
- it is important to insulate the bathroom walls in contact with cold air or drafts;
- it is required to remove cracks, which will give the room not only a beautiful appearance, but also eliminate the conditions for the formation of fungus;
- during construction and repair, you need to use special antiseptics, as well as use materials that are resistant to moisture;
- underfloor heating in the bathroom will reduce the high humidity in the room;
- when installing furniture, it is necessary to leave a small space near the walls so that air can circulate freely there.
Subject to their observance, you can not worry that black mold will reappear in the bathroom, and will spoil the appearance, as well as be harmful to health.
