A sample protocol is a re-examination of knowledge of slingers. Protocol for checking the knowledge of slingers sample filling
Training for slingers
(primary education, re-certification, increase of the discharge level)
Who are the slingers?
Slingers call workers engaged in tying cargo or special devices for loading and unloading operations using load-lifting mechanisms. Most often this specialty is in demand in construction, in ports and railway cargo terminals and in heavy industry. When working with volumetric and heavy loads, it is necessary to observe a number of safety precautions (because the incorrectly fixed load is able to drop the crane), therefore applicants for this vacancy must necessarily take training courses for slingers. After completing the courses, you can get a special slinger certificate that will give you the right to work in this field.
Identification of the slinger
The process of training slingers consists of training in working with load-lifting machines and types of containers, working with devices for grabbing loads. In detail, safety issues are discussed: for example, the correct inspection and inspection of the lifting mechanism. You can get the identity of the slinger by studying at special courses. Only after completing them and passing the exams will you be able to acquire the identity of the slinger.
Work slinger
The tasks that the slinger encounters daily are not as simple as they seem at first glance. The most important complication is the constant monitoring of compliance with safety regulations. The list of necessary competencies is reflected in the protocol of the slinger, which he receives after passing the examinations of the attestation commission.
Renewal of the slinger's identity
Since the validity of the slinger's certificate is only 5 years, there is a need to extend this document. Renewal is faster and cheaper than issuing a new certificate and there is no need to again attend training courses for slingers.
Here you can get all the necessary information about passing the courses, and in the attached files you can download a sample of the slinger's identity.
Classes are held every week. If desired and according to a separate agreement, classes can be held on the customer's premises.
Training takes place both in full-time and in distance form.
The certificate is issued for a period of up to 5 years with an annual re-examination of knowledge.
Assignment: 2-6
Duration of training: 140 hours.
The issued document: the certificate of the established sample, the report of knowledge check, the license.
All questions concerning the terms of registration and cost, please ask specialists
Workers who do not undergo preliminary training, instructing and testing knowledge on safety and health issues are not allowed to work. Title of section 3 in the edition of the government decree pk of 01. It seems to be a trifle, protocol and protocol, but when you work with uncomfortable forms, you immediately understand that such trifles matter much in the work.
Attire-rsattama bojynsha zhmys jrzizetin izzmetkerlerge zhirizilietin masatti nsama attire-rsatnamada nesse jmystaardy jrzizuge rsat beretin bass jattamada belgilene. Ebek aupsizdigi zhne ebekti orau mseeleeri boynynsa aldyn-ala oytudan, nsama beruden zhne ollardy bilimderin tekseruden tpegen yzmetkerler zhmis zhibiilmeidi. The act of hydrostatic testing of low-pressure boilers (water heaters, boiler auxiliary equipment, mazout line) (офф цкс) work permit for work in places of action of dangerous or harmful factors (rd-) work permit for work by lifting machines near the overhead power line rd-) the journal of accounting knowledge of norms and rules of work in electrical installations (pp 153-34.) When entering the workplace, each employee must undergo an introductory briefing, initial instruction, training and training.
If this form is done in tabular form, and does not care about GOST R 6. kalinino yzmetkerlerdi bilimіn tekseru ntizheleri wasps aidalardy sykes hattamamen resimdeledi. a log of thermal energy and heat carrier accounting for the consumer in steam heat consumption systems (Rd 34.).
The basis of the protocol of the examination committee. We can be trained on fronts - labor protection - fire-technical minimum - work at height - increase in qualification - ecology - th and hc 1) blog-engineer. Ебек ауiпсiздiгi жне ебектi орау боынша бiлiмiн тексеруден ткен басшы узметкерлеге осы аидаларды сйкес азастанны barley aumynda jaramda belgilengene лгiдегi certificate Берлиледi.
Httpzakupki gov
A certificate, a protocol and a certificate of the established standard are issued. The issue of certification of machinists of hoisting machines and slingers. So in my case it is necessary to conduct training of workers or not, to my workers (security guard, janitor, machinist, etc.)
Ensuring the safety of educational
Introductory briefing in the organization (enterprise) is carried out by the security and labor protection service or by a person who has been assigned these duties by an order of the organization. At repeated absence of check of popypopopoponoponazn on safety and labor protection, the leading employee is suspended from work in the order established by the legislation of the Republic of Kazakhstan. The results of attestation and a repeated check of the criminals' poppos are identified.
Пб 10-382-00 - rules of the device and safe
The composition of the commission for the inspection of the workers' popols is determined by the order of the supervised. 
The scope and content of the briefing is determined in each specific case, depending on the events and events that necessitated its conduct.
In the identification of the slinger, the last check of the saints was done in. With regard to the kindergarten, in this case, the educators, the head - should be trained once in three years.
Labor is issued a certificate of the established standard, valid throughout. Instructions at the workplace end with the verification of the pop-ups by an oral questionnaire or with the help of technical training tools, as well as checking the acquired abilities of non-hazardous working methods. or simply a protocol of attestation and verification of the populism on.
Trained in the UTS will check the popypopopopopnaznaniy with the registration of the protocol. The slinger's certificate is issued by our training combine of Moscow on the basis.
The types of such professions and jobs are determined by the state education of the USSR in agreement with the bodies of municipal supervision and the technical inspection of labor. It is not specified which specialists are responsible for compliance with labor protection requirements, for ensuring a non-hazardous labor test. 
Training in labor protection 100 - in percent is not measured.
In paragraph 26 of the RD 03-20-2007 it is established that the procedure for testing the knowledge of workers is carried out in accordance with the procedure established in the supervised organization. This order is regulated by the relevant internal document of the organization (instruction, position, standard, order, etc.), which establishes the format for carrying out a knowledge check (ticket exam, oral survey, knowledge testing with technical training tools, etc.). ). The initial admission to independent work after a safety briefing, an internship at the workplace, a knowledge check is formalized by an order for the organization, which establishes the conditions for admission: the existence of a certificate for the right of independent work, as stipulated in paragraph 26 of the RD 03-20-2007, with a note on the periodic or, if necessary, an extraordinary) passing of inspections of knowledge of industrial instructions.
For educational institutions that do not have state accreditation, can be adopted as an approximate order established by the letter of the Ministry of Education of Russia of 26.10.2000 No. 06-51-92 in / 17-06
"On the Procedure for Completing and Issuing State-Level Documents on the Level of Education and Qualification for Graduates of Educational Institutions of Basic Professional Education".
Certification of personnel
The training of workers in these specialties must be carried out according to programs developed by training centers and coordinated with Gosgortekhnadzor of Russia.9.4.24. The workers of the main occupations (machine operator, installer, etc.) are allowed to operate the crane from the floor or from the fixed console and to hook the cargo onto the hook of such a crane after appropriate briefing and checking the skills for managing the crane and lifting the cargo in the order established by the owner of the crane.
Certified by the seal of the organization.
A letter (download.doc) addressed to the head of the North-West Department of Rostechnadzor about knowledge verification. The original of the Protocol of the previous knowledge test.
Identity card. confirming knowledge verification. Document. confirming the education corresponding to the position of the examiner
And where it is possible in the future to get acquainted with the new normative acts?
In Rostechnadzor on information systems of general use, a citizen asked to give an answer to the following question. Now I work as a mechanic of the workshop, by education I am a metallurgical engineer.
Can I be appointed responsible for the electrical workshop? On information systems of common use the following appeal was received.
РД 10-107-96 Typical instruction for slingers on safe production of works by load-lifting machines
This Standard Instruction is developed in accordance with the "Rules for the Application of Technical Devices at Hazardous Production Facilities" approved by the Resolution of the Government of the Russian Federation No. 1540 of December 25, 1998 (Collected Legislation of the Russian Federation, 1999, No. 1, Article 191)"Rules for the organization and implementation of industrial control over compliance with industrial safety requirements at a hazardous production facility", approved by the Resolution of the Government of the Russian Federation of 10.03.99 No. 263 (Collected Legislation of the Russian Federation, 1999, No. 11, art.
Training by profession - Slinger
At the end of theoretical and practical training, a qualification exam is conducted. Persons who successfully passed the qualification examination for conducting specific works at the site on the basis of the protocol of the qualification commission are issued a certificate of profession / position "Slingsman" with the assignment of the corresponding category, as well as a certificate for admission to the operation of lifting equipment and an extract from the protocol.Industrial safety and labor protection. Basic information about lifting structures.
Load-handling devices and containers. Manufacturing jobs. Types and methods of slinging loads.
Safety measures in the manufacture of loading and unloading operations. Safety measures during construction and installation works.
Safety measures for the installation of process equipment. Security measures for the construction (installation) of main pipelines.
Safety measures in the production of works using lifting structures near power lines. A production (standard) instruction for slingers on safe maintenance of lifting structures.
Workers need to undergo an annual knowledge check in the scope of the production instruction,
43. An extraordinary audit of the knowledge of managers and specialists on occupational safety and health is conducted:.
at acceptance of acts of the legislation containing requirements on a labor safety which observance enters into their official duties. At the same time, only knowledge of these legislative acts is verified; .
Ask and you will be given. Search and find. Knock and you will be discovered. Because everyone who asks - receives, and everyone who searches - finds, and who knocks - to it open.
So in everything, do to people as you want them to do to you. In the volume of the approved list of instructions for from the enterprise.
And it will be as in one institute (but it suits me) enumerated the normative acts on the floor of the A4 sheet (although they have not yet prideralsya with this listing of the NRA);) In the protocols of checking the knowledge of workers, I write
"Instructions on labor protection by profession and types of work performed", specialists in "official duties".
Buy a slinger's certificate, slinger training, slinger courses in Moscow
No matter what form of training you choose, you will have to pass the certification of slingers in any case.The final examination is taken by the attestation commission, the decision of which is issued a signed certificate of the slinger with the stamp of the training center, as well as a protocol with the results of the audit, certified with signatures and a seal of the CA. If you need to extend the identity of the slinger, you can also apply to the Story-Certificate, where you will be helped to draw up all the papers and pass the re-certification.
For all questions about the cost, timing of the certification, please contact our managers, they will be happy to help resolve all issues and get your documents in the shortest time and at favorable prices! Training (theory, practice) slinger you can get from us by submitting an application.
Minutes of the meeting of the Commission for the Verification of the Knowledge of the Requirements of the Labor Protection Service No. 1 in RuNet!
If one of them participates in the examination of knowledge on labor protection, then in the protocol it is necessary to add the appropriate fields. And what about compliance with GOST R 6.30-2003 "Unified documentation systems.Unified system of organizational and administrative documentation. Requirements for registration of documents "establishes the minimum size of fields.
Each sheet of the document, designed as a letterhead,
Types of classes: lectures and practical exercises. Form of the final control of knowledge: testing.
Sign up for the course Based on the results of the training, a certificate of the established type and a protocol of the meeting of the qualification commission are issued. Validity period of the certificate: 5 years. Duration of training: 250 ... Occupational safety at work at height. Compulsory measures for the employer in accordance with the new rules of work at the height on May 6, 2015, the new Occupational Safety and Health Regulations (hereinafter the Rules) came into force.
Attestation of slingers
After finishing training courses slinger you will have to pass the final attestation of knowledge, and if the exam is successfully passed you will receive a slinger's certificate. which is a testament to your professionalism, exceptional knowledge of this specialty and safety when using equipment.The educational center "MinMax" provides distance learning, certification and refresher courses throughout the territory of the Russian Federation, including in the cities: Moscow, St. Petersburg, Ekaterinburg, Saratov.
24. The results of knowledge assessment are formalized in a protocol in accordance with the form attached to the present Instruction.
The conclusion on the results of the knowledge assessment is recorded in the record with the following entry: "handed over" or "failed." The protocol is certified by the signatures of the chairman and members of the commission and certified with a seal.
In non-destructive testing, there should be no cracks in the cut part of the forged (stamped) hook, no cracks in the cut part of the fork of the plate hook and the axis of its connection with the fork or traverse. Turning to our specialists, we can extend the identity of the slinger within 2-4 working days. The number of slingers servicing the hoisting machine is determined by the person responsible for the safe production of work by lifting machines. Only after that, sign the protocol and ask the inspector for a copy. In the order, the inspector will indicate only those violations that you recognized. 
A statement from organizations on sending employees to the knowledge check is sent to the Secretariat of the Territorial Attestation Commission of the Ural Department of Rostechnadzor through the Single Window of Management at the address: Ekaterinburg, Lane. Yes, the inspector can go beyond the scope of the application and consider all the issues specified in the verification order. Leaders who do not pass the safety and labor protection knowledge test remain in the position until the knowledge is re-tested, which is conducted no later than 3 months after the date of the knowledge check. Good morning, tell me please, after training in the UTS slingers are issued a certificate, they do not issue a certificate of admission, they say it is issued in the organization, how to make this admission? what form of identity is it not OT, to check the knowledge of the production instruction or how? At the same time, its engine should be cut off at a distance up to the stop, which is not less than half the way of braking the mechanisms, and for tower, gantry and gantry cranes and bridge overloaders - not less than the full path of braking. 
Only the inspector whose surname is listed in the order for inspection can verify. In such a situation, you may well ask the inspector to leave. The date and time of the object's withdrawal into the repair are recorded in the logbook. For the repair of bridge and cantilever mobile cranes, it is necessary to issue an order-admission in which to indicate the person responsible for the repair of the crane and measures to create safe conditions for performing repair work. The results of the knowledge check should be formalized in a protocol with a note in the certificate.
The slinger's certificate can be purchased (or, more accurately, made without interruption from production) with our assistance.
We will help to get this document as soon as possible (according to the existing norms 2-3 working days), and there is no need to separate the specialist from the work activity.
The received package of documents (certificate, extract from the protocol, if necessary - a copy of the license of the training center) is completely legal, it can be provided to all instances that exercise control.
Prices and a list of required documents are available on our main site
What is the slinger's identity?
Identification of the slinger- a qualification document that confirms the employee's ability to interact with load-lifting mechanisms safely (slings and other devices). It is issued to persons who have reached the age of 18, who have undergone special training and preparation.
This certificate gives the right to the slinger to perform direct duties at his workplace, as well as to be responsible for the work done before the responsible person. Always should be with him, present at the first request of the controlling person.
Requires availability on the basis of Order N533, as well as a standard instruction for slingers.
How to make a certificate slinger
Until recently, this qualification was supervised (it was only possible to pass the examination in Rosstekhnadzor), but with the release of Order N533, all employees began to pass the exam and take the exam without the presence of a Russian supervisor (at the company or in the training center).
Registration is possible in the training center, as well as with our help.
Our organization will be able to help only if the employee has passed the certification before and has serious experience in this direction. A link to the necessary documents can be found at the beginning of the article.
Young employees who do not have experience on the shoulders, it is better to send to the training center. The training takes about a month (72 hours), at the end, passing the exam and getting a "crust".
It must be renewed annually.
Price of the slinger's certificate
On the Internet, I saw a lot of types of prices for this document. The question is, what is the competitor's interest-price or legitimacy.
The prices that can be found are aimed at the legitimacy of the document. On the cheap it is not difficult to guess what the "buyer" is acquiring.
But recently, even for fakes prices soared above the sky.
Many who are engaged in "filth letter", advertise their services through paid search engine services (Yandex.direct for example), which is not very cheap. Therefore, prices are bending higher than those who draw up normal documents.
Before you chase after cheapness or quick design, ask how they make out certificate for the slinger or other directions, ask questions to the respondent (if you call by phone, and the courier or dispatcher answers, you immediately understand what kind of documents they provide), ask why such a price for an ID, just ask about the certification you need. During the conversation you will understand, you are talking with a professional, or "dispatcher".
Photo slicer and pattern of filling
The certificate has a size of 80mm X 225mm. Cardboard crust with vinyl cover. 14 pages.
The first page prescribes the name of the training center that issued the document, the number of the protocol, the date of issue, the photo of the slinger, the printing of the training center.
On the second page- the full name of the holder, the date of issue, the name of the training center, the direction in the lifting operations (slinger).
The third is data on the decision of the examination committee, the qualification (slinger) assigned, to which equipment is allowed to service.
Fourth, data on the decision of the commission and the protocol, the signature of the chairman of the commission, the head of the training enterprise.
5, 6, 7, 8, 9- information on repeated inspections.
10, 12 - coupons of violations.
The validity of the identity for the slinger- 1 year. That is, it will have to be renewed annually, as well as at the request of the controlling authorities (this may be a month after the certification, and even a week).
Those responsible for correct registration, as well as for the correspondence of the validity periods of certificates to slingers, are the head of the enterprise and his deputies appointed for the role of responsible persons.
Conclusion: - a document confirming the qualification of the slinger, and indicating the ability to interact at the workplace is safe. You can get it with our help (on the job), or at the training center (month with personal presence). It is necessary to have, at all times, at work with you and present to all controlling persons. Responsible for the availability and timely registration of the certificate - the head of the organization and persons appointed to the role of the responsible.
We will help you to issue a certificate for the slinger in a short time
